Thank you very much for choosing the EIZO product.
Please read this User’s Manual carefully to familiarize yourself with safe and effective usage procedures.
Please retain this manual for future reference.
[Location of the Caution Statements]
PRECAUTIONS
zꢀTo ensure personal safety and proper maintenance, please read this
section and the caution statements on the unit.
WARNING
zꢀAttach the applicable EIZO LCD monitor only.
Not doing so may cause the arm or monitor to fall, which may result in injury or
equipment damage.
zꢀAttach the arm with another person.
Do not attach it alone. Doing so may result in injury or equipment damage.
zꢀAffix the arm securely on the base.
Not doing so may cause the monitor to fall and result in injury or equipment damage.
zꢀAffix the arm on an appropriate base.
Do not affix the arm on such a base as shown below or on a weak base which cannot
support the monitor or arm. Affixing the arm on these bases may cause the monitor to
fall and result in injury.
Not hooking enough
On tapered desk
On Pole
On Wall
zꢀClamp the knob of the arm tightly.
If the arm becomes unstable, clamp the knob of the arm securely again. Loose
clamping may cause the monitor to fall and result in injury or equipment damage.
zꢀDo not hang from or lean on the arm.
Doing so may cause the monitor to tumble or fall and result in injury or equipment
damage.
zꢀWhen moving the arm, be sure not to pinch a finger between the moving parts.
zꢀWhen rotating the monitor for portrait display, make a space enough between a
desk and a monitor not to pinch a finger.
zꢀDo not disassemble.
The spring mechanism inside of the stand may result in injury or equipment damage
when disassembling.
3. Connect the signal cable and the power cord.
Connect the power cord.
To the power connector
of the monitor
LA-121-DA:
To the signal input
connector of the monitor
Connect the signal cable.
LA-121-DD:
Connect the computer.
NOTE
zꢀThe arm has the capability of pivoting the monitor by removing the stopper (screws) in side of the
shield plate.
Please consult the monitor manufacturer about the pivoting capability of the monitor.
Stopper
Shield Plate
____________________________________
Specifications
Dimension (W) x (H) x (D) 150 (5.9) x 556 ~ 264 (21.9 ~ 10.4) x 206 ~ 556 (8.1 ~ 21.9) mm (inch)
Weight
3.7 kg (8.2 lbs.)
125 V, 7A, 1.2 m
Power Cord
Signal Cable
LA-121-DA: D-Sub mini 15 pin - D-Sub mini 15 pin, 1.2 m
LA-121-DD: DVI-D 25 pin - DVI-D 25 pin, 3.0 m
„Dimensions
Unit: mm (inch)
NOTE
zꢀThe value within the dimensions drawing is only for reference, and range of motion may differ
according to the installed condition.
LIMITED WARRANTY
EIZO NANAO CORPORATION (“EIZO”) and EIZO authorized distributors warrant, subject to and in
accordance with the terms of this warranty, to the original purchaser who purchased the product from EIZO or
EIZO authorized distributors that this product shall be free from defects in material and workmanship for a
period of one (1) year from the date of purchase, and that, in the event of malfunction of the product during the
warranty period attributable directly to defective material and/or workmanship, EIZO and EIZO authorized
distributors will, at their sole discretion, either repair or replace the defective product. EIZO and EIZO
authorized distributors shall bear no other liability or obligation under this warranty. EIZO and EIZO
authorized distributors cease to bear any obligation under this warranty with regard to any parts of the product
upon expiration of five (5) years after the production of such parts is discontinued. This warranty is valid only
in the countries or territories where the EIZO authorized distributors are located. This Limited Warranty does
not restrict legal rights as granted by implied warranty against the vendor.
Furthermore, EIZO and EIZO authorized distributors shall have no obligation under this warranty whatsoever
in respect of any of such defects, or in any of such cases, as set forth below:
Any defect of the product caused by freight damage, modification, alteration, abuse, misuse, accident, incorrect
installation, disaster, faulty maintenance and/or improper repair by third party other than EIZO and EIZO
authorized distributors.
To obtain service under this warranty, the original purchaser must deliver the product, freight prepaid, in its original
package or other adequate package affording an equal degree of protection, assuming the risk of damage and/or loss
in transit, to the local EIZO authorized distributor. The original purchaser must present proof of purchase
establishing the date of purchase of the product when requesting warranty service.
Warranty period for any replaced and/or repaired product under this warranty shall expire at the end of the
original warranty period.
EIZO AND EIZO AUTHORIZED DISTRIBUTORS MAKE NO FURTHER WARRANTIES, EXPRESSED OR
IMPLIED, WITH RESPECT TO THE PRODUCT AND ITS QUALITY, PERFORMANCE, MERCHANTABILITY
OR FITNESS FOR ANY PARTICULAR USE. IN NO EVENT SHALL EIZO OR EIZO AUTHORIZED
DISTRIBUTORS BE LIABLE FOR ANY INCIDENTAL, INDIRECT, SPECIAL, CONSEQUENTIAL OR OTHER
DAMAGE WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFIT,
BUSINESS INTERRUPTION, LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS)
ARISING OUT OF THE USE OR INABILITY TO USE THE PRODUCT OR IN ANY CONNECTION WITH
THE PRODUCT, WHETHER BASED ON CONTRACT, TORT, NEGLIGENCE, STRICT LIABILITY OR
OTHERWISE, EVEN IF EIZO OR EIZO AUTHORIZED DISTRIBUTORS HAVE BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. THIS EXCLUSION ALSO INCLUDES ANY LIABILITY WHICH MAY
ARISE OUT OF THIRD PARTY CLAIMS AGAINST THE ORIGINAL PURCHASER. THE ESSENCE OF THE
PROVISION IS TO LIMIT THE POTENTIAL LIABILITY OF EIZO AND EIZO AUTHORIZED
DISTRIBUTORS ARISING OUT OF THIS LIMITED WARRANTY AND/OR SALES.
|